ImageOps A Technical Solution Oriented Source with a Deep Understanding of Video and Imaging
San Diego, California
Phone: (858) 613-1818
null
Site Search
Infrastructure and Signal Processing for Broadcast and Post


Products

BrightEye 94 SD Aspect Ratio Converter

BrightEye 94 SD Aspect Ratio Converter
BrightEye 94 Front


BrightEye 94 SD Aspect Ratio Converter
BrightEye 94 Rear

  • SD ARC
  • Timeable output
  • HDMI output
  • Frame Sync
  • 12 and 16 bit processing

 

Download Datasheet

BrightEye 94 is a standard definition aspect ratio converter. You can easily convert signals from 4:3 to SD 16:9, and vice versa.

 

 

All vertical interval data and closed captioning are faithfully passed. Sixteen channels of embedded audio are supported. If the incoming video has embedded audio, the audio will be safely bypassed around the video processing and lipsync will be preserved. An external reference input allows genlock to a house reference.

 

 

Input selection, gain control, and test pattern controls are provided through the front panel interface. Audio presence LEDs indicate which channels are detected. Controls for crop, letterbox and pillarbox are accessed from the front panel or BrightEye Mac or PC software. A special Mirror Output Mode can be enabled, causing the output image to be flipped left to right for use with on-camera talent.

 

BrightEye 94 Specifications

Analog Video Input

  • Number: One
  • Type: Analog Composite PAL or NTSC
  • Resolution: Digitized at 12 bits
  • Impedance: 75 O
  • Return Loss: >40 dB
  • Input DC: +/-1 volt DC
  • Input Hum: <100 mV

Serial Digital Input

  • Number: One
  • Signal Type: 270 Mb/s SD Serial Digital (SMPTE 259M)
  • Impedance: 75 O
  • Return Loss: >15 dB
  • Max Cable Length: 300 meters for 270 Mb/s

Analog Video Output

  • Number: One
  • Type: Composite PAL or NTSC
  • Return Loss: >40 dB
  • Output DC: <100 mV

Reference Input

  • Number: One
  • Type: 1 V p-p Composite Video PAL or NTSC or Tri-Level Sync
  • Impedance: 75 O
  • Return Loss: >40 dB

Serial Digital Output

  • Number: Two
  • Type: SD Serial Digital 270 Mb/s SMPTE 259M-C
  • Processing: 12 and 16 bit
  • Impedance: 75 O
  • Return Loss: >15 dB
  • Max Cable Length: 300 Meters

Monitor Output

  • Number: One
  • Connectorization: HDMI
  • Audio Monitoring: Output
  • Number: One (select from eight channels)
  • Connectorization: 3.5 mm stereo mini jack

General Specifications

  • Size: 5.625" W x 1.7" H x 5.5" D (143 mm x 40 mm x 140 mm) including connectors
  • Power: 12 volts, 7 watts (100-230 VAC modular power supply not included)
  • Temperature Range: 0 to 40 C ambient
  • Relative Humidity: 0 to 95%, non-condensing

 

 


 

|
Consulting
|
|
|
|
News
|

 

ImageOps, Division of Computer Modules, Inc.
11409 West Bernardo Court * San Diego, CA 92127 Phone: (858) 613-1818 * Fax: (858) 613-1815
_________________________________________________________________________________
© 2019 ImageOps.com. All rights reserved.